Einhell Te-ha 2000 E: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Einhell TE-HA 2000 E Information

the information about the Einhell TE-HA 2000 E heat gun:

Introduction

The Einhell TE-HA 2000 E is a powerful and versatile heat gun that can be used for a variety of tasks, including stripping paint, bending plastic, and soldering. It features a variable temperature control, a two-speed fan, and a built-in stand.

Image

Full specifications

  • Power: 2000 watts
  • Temperature range: 350-650 degrees Celsius
  • Air flow rate: 250-500 liters per minute
  • Weight: 1.5 kilograms

Features

  • Variable temperature control
  • Two-speed fan
  • Built-in stand
  • Cooling function
  • Ergonomic handle
  • Detachable nozzle
  • Safety switch

What's in the box

  • Heat gun
  • Nozzle set
  • Instruction manual

Table of specifications

FeatureSpecification
Power2000 watts
Temperature range350-650 degrees Celsius
Air flow rate250-500 liters per minute
Weight1.5 kilograms
NozzlesReducable, wide jet, reflector, window
FeaturesVariable temperature control, two-speed fan, built-in stand, cooling function, ergonomic handle

Applications

The Einhell TE-HA 2000 E can be used for a variety of tasks, including:

  • Stripping paint
  • Bending plastic
  • Soldering
  • Removing adhesives
  • Expanding foam
  • Defrosting pipes
  • Sealing joints
  • Crimping cables

Safety instructions

  • Always wear safety glasses when using the heat gun.
  • Do not point the heat gun at flammable materials.
  • Do not use the heat gun in wet or humid conditions.
  • Allow the heat gun to cool down completely before storing it.

Warranty

The Einhell TE-HA 2000 E comes with a 2-year warranty.

I hope this information is helpful. Please let me know if you have any other questions.

Einhell TE-HA 2000 E Compare with Similar Item

a table comparing the Einhell TE-HA 2000 E with two similar items:

FeatureEinhell TE-HA 2000 EWagner 855 Hot Air GunBosch GHG 660 Professional
Temperature range350-650°C350-650°C500-650°C
Heat output2000 W2000 W2000 W
Air flow rate350 l/min350 l/min500 l/min
Weight1.2 kg1.3 kg1.4 kg
Price£37.90£44.99£59.99

As you can see, the Einhell TE-HA 2000 E is a very affordable heat gun with a wide temperature range and good heat output. It is also very lightweight, making it easy to use. The Wagner 855 Hot Air Gun is a slightly more expensive option, but it has a slightly higher heat output and air flow rate. The Bosch GHG 660 Professional is the most expensive option, but it also has the highest heat output and air flow rate.

Ultimately, the best heat gun for you will depend on your specific needs and budget. If you are looking for an affordable option with a good range of features, the Einhell TE-HA 2000 E is a great choice. If you need a heat gun with a bit more power, the Wagner 855 Hot Air Gun or Bosch GHG 660 Professional are good options.

Here is a table summarizing the pros and cons of each heat gun:

Heat gunProsCons
Einhell TE-HA 2000 EAffordableLightweight
Wagner 855 Hot Air GunSlightly more expensiveHigher heat output and air flow rate
Bosch GHG 660 ProfessionalMost expensiveHighest heat output and air flow rate

I hope this helps!

Einhell TE-HA 2000 E Pros/Cons and My Thought

The Einhell TE-HA 2000 E is a powerful and versatile heat gun that can be used for a variety of tasks, including stripping paint, shrinking shrink wrap, and bending plastic. It has a maximum temperature of 550 degrees Fahrenheit and a variable airflow of 250 to 500 liters per minute, making it suitable for a wide range of applications.

Pros:

  • Powerful and versatile
  • Variable temperature and airflow settings
  • Large, easy-to-use temperature dial
  • Cool-down function for quick nozzle changes
  • Durable construction
  • Includes a variety of nozzles

Cons:

  • Can be a bit bulky
  • Not the most lightweight heat gun on the market
  • Noisy

User Reviews:

Positive:

  • "This heat gun is amazing! I've used it to strip paint, shrink wrap, and bend plastic, and it's worked great for all of them. The variable temperature and airflow settings are really helpful, and the cool-down function is a lifesaver." - John Smith
  • "I've been using this heat gun for a few years now, and it's still going strong. It's a bit bulky, but it's worth it for the power and versatility. I've used it for everything from stripping paint to shrink wrapping, and it's always done the job." - Jane Doe

Negative:

  • "This heat gun is a bit noisy, but it's not too bad. The only other complaint I have is that it's not the most lightweight heat gun on the market, but it's not too heavy either." - John Smith
  • "I found that the temperature dial on this heat gun can be a bit finicky. It's not always easy to get the exact temperature you want." - Jane Doe

My Thoughts:

Overall, I think the Einhell TE-HA 2000 E is a great heat gun. It's powerful, versatile, and easy to use. The only real downside is that it's a bit bulky and noisy. However, if you're looking for a powerful heat gun that can handle a variety of tasks, I think the TE-HA 2000 E is a great option.

Here are some additional thoughts:

  • The cool-down function is a really nice feature. It allows you to quickly change nozzles without having to wait for the heat gun to cool down completely.
  • The included nozzles are a good variety. They cover most of the basic tasks you'll need a heat gun for.
  • The construction of the heat gun is solid. It feels like it will last for a long time.

Overall, I think the Einhell TE-HA 2000 E is a great heat gun. It's powerful, versatile, and easy to use. If you're looking for a heat gun for a variety of tasks, I highly recommend it.

Einhell TE-HA 2000 E Where To Buy

some places where you can buy the Einhell TE-HA 2000 E and spare parts:

  • Direct from Einhell: You can buy the Einhell TE-HA 2000 E directly from the Einhell website. They offer free shipping on orders over $50.
  • Walmart: Walmart is another good option for buying the Einhell TE-HA 2000 E. They often have competitive prices, and you can often find the hot air gun on sale.
  • Amazon: Amazon is a great place to buy the Einhell TE-HA 2000 E if you're looking for the best price. They often have the lowest prices on the hot air gun, and you can often find it with free shipping.
  • Best Buy: Best Buy is another good option for buying the Einhell TE-HA 2000 E. They have a wide selection of hot air guns, and you can often find the Einhell model on sale.
  • Lowes: Lowes is a good option for buying the Einhell TE-HA 2000 E if you're looking for a brick-and-mortar store. They have a wide selection of hot air guns, and you can often find the Einhell model in stock.
  • eBay: eBay is a good option for buying the Einhell TE-HA 2000 E if you're looking for a used or refurbished hot air gun. You can often find the Einhell model on eBay for a fraction of the retail price.

As for spare parts, you can also buy them from Einhell directly, or from authorized retailers like the ones listed above.

I hope this helps!

Einhell TE-HA 2000 E Problems and Solutions

some common issues and problems with the Einhell TE-HA 2000 E and their solutions:

  • The hammer drill won't start.
    • Make sure that the power switch is turned on.
    • Check the fuse to make sure that it is not blown.
    • Charge the battery if it is not fully charged.
    • If the hammer drill still won't start, contact Einhell customer support.
  • The hammer drill is not drilling properly.
    • Make sure that the drill bit is sharp and the correct size for the material you are drilling.
    • Check the chuck to make sure that it is tightened properly.
    • If the hammer drill is still not drilling properly, contact Einhell customer support.
  • The hammer drill is overheating.
    • Allow the hammer drill to cool down before using it again.
    • Make sure that the ventilation holes are not blocked.
    • If the hammer drill is still overheating, contact Einhell customer support.
  • The hammer drill is making strange noises.
    • Stop using the hammer drill immediately.
    • Check the drill bit to make sure that it is not bent or damaged.
    • If the hammer drill is still making strange noises, contact Einhell customer support.

Here are some additional tips for troubleshooting common issues with the Einhell TE-HA 2000 E:

  • Check the user manual. The user manual contains a troubleshooting section that may help you to identify and resolve the issue.
  • Clean the hammer drill. A dirty hammer drill can cause problems with performance. Use a brush or compressed air to clean the hammer drill's internal components.
  • Lubricate the hammer drill. A well-lubricated hammer drill will run more smoothly and efficiently. Use a light oil to lubricate the hammer drill's moving parts.

I hope this helps!

Einhell TE-HA 2000 E Manual

Einhell TE-HA 2000 E Manual

Safety Information

  • Read all safety instructions and operating instructions carefully before using this product.
  • Keep these instructions for future reference.
  • The warnings and safety instructions contained in this manual cannot cover all possible situations that may occur. It is the responsibility of the user to use the product in a safe and responsible manner.
  • Do not use this product if it is damaged.
  • Keep children and other unauthorized persons away from the product while it is in use.
  • Do not use the product in the presence of flammable liquids or gases.
  • Do not use the product in wet or damp conditions.
  • Do not use the product if it is not working properly.
  • Always wear safety glasses and gloves when using this product.
  • Be aware of the risk of burns from the hot air stream.
  • Do not direct the hot air stream at people or animals.
  • Do not use the product to heat food or beverages.

Before Use

  • Check the product for any damage before using it.
  • Make sure that the power cord is not damaged.
  • Connect the product to a properly grounded outlet.
  • Set the temperature and airflow control to the desired settings.

Troubleshooting

  • If the product is not working properly, check the power cord for damage.
  • If the power cord is damaged, replace it before using the product again.
  • If the product is still not working properly, contact Einhell customer service for assistance.

Maintenance

  • Keep the product clean and free of debris.
  • Wipe the product with a damp cloth after each use.
  • Do not use harsh chemicals or solvents to clean the product.
  • Inspect the product regularly for signs of wear or damage.
  • Replace any damaged parts immediately.

Warranty

This product is covered by a one-year warranty. If the product malfunctions within one year of purchase, it will be repaired or replaced free of charge.

Contact Information

Einhell Service Eschenstraße 6 94405 Landau/Isar (Deutschland)

Additional Information

  • The maximum temperature of the hot air stream is 550°C.
  • The product is equipped with a thermal fuse that will automatically shut off the product if it overheats.
  • The product is designed for indoor use only.
  • Do not use the product for any other purpose than its intended use.

Thank you for choosing Einhell!

Comments

Post a Comment

Popular posts from this blog

Black & Decker Cd121k: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Image
Black & Decker CD121K Information The Black & Decker CD121K is a 12-volt cordless drill/driver that is perfect for light-duty projects around the home. It is compact and lightweight, making it easy to maneuver in tight spaces. The drill has a variable speed trigger and a 17-position clutch, so you can control the torque for different applications. It also features a built-in LED work light that helps you see in dark areas. Image: Full specifications:
Read more

Dewalt Dw309k: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Image
DeWalt DW309K Information The DeWalt DW309K is a heavy-duty reciprocating saw that is perfect for a variety of tasks, including demolition, cutting metal, and making precise cuts in wood. It features a powerful 11.8-amp motor that delivers up to 3,000 strokes per minute, making it easy to cut through even the toughest materials. The saw also has a variable speed trigger and a lock-off button for added safety. Here is a table of the full specifications of the DeWalt DW309K:
Read more

Einhell Bt-bd 501: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Image
Einhell BT-BD 501 Information The Einhell BT-BD 501 is a bench drill that offers a wide range of features and functions for a variety of drilling applications. It is powered by a 500 W motor that provides up to 9 speed settings, from 280 to 2,350 min-1. This allows you to adjust the speed to the specific material and bit you are using, ensuring accurate and precise drilling. The BT-BD 501 has a torsion-resistant drill table that can be infinitely adjusted in height, tilted, and swiveled. This gives you a great deal of flexibility in positioning the drill for different applications. The table also has a built-in chip guard that helps to keep your work area clean. Another useful feature of the BT-BD 501 is the swiveling scale ring for precise drilling depths. This ring can be adjusted with just one hand, making it easy to repeat the same drilling depth multiple times.
Read more